Sunday, July 29, 2012

Zinc Plated Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100)

!9# Zinc Plated Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100)

Brand : Small Parts |Post Date : Jul 29, 2012 13:57:04 | Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Machine Screws are often used with nuts or driven into tapped holes
Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
Binding head provides a large surface area for extra surface contact under the head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

The Cheapest 2x Digital Telephoto Professional Series Lens 0.5x Digital Wide An... Mens Black Delli Aldo Driving Moccasins Boat Lace Shoes Styled In Italy... Best All Pro Solutions Cf Memory Card 1 To 31 Target Duplicator - Compact F... Buy Online

Monday, July 23, 2012

Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #4-40, 3/4" Length (Pack of 100)

!9# Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #4-40, 3/4" Length (Pack of 100)

Brand : Small Parts | Rate :

| Post Date : Jul 23, 2012 23:58:04 | Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Combination Phillips-Slotted drive styles allow for greater flexibility in choosing a drive tool (either Phillips or standard slotted).

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Machine Screws are often used with nuts or driven into tapped holes
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations; black color
Binding head provides a large surface area for extra surface contact under the head
Accommodates both Phillips and Slotted drivers
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Fisher Play Kitchens Cheap Reviews Wilson Electronics 801241 Mobilepro Multiple-user Cell Phone Signal Boost... Sw-switched On School 11-language Arts (grade 3)... Instruction

Tuesday, July 17, 2012

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 3/8" Length (Pack of 100)

!9# Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 3/8" Length (Pack of 100)

Brand : Small Parts | Rate :

| Post Date : Jul 17, 2012 20:34:04 | Usually ships in 24 hours

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 3/8" Length (Pack of 100)

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

More Specification..!!

Reviews Neewer 5x Retractable Ethernet Cat5 Rj45 Lan Network Cable 5ft... Siskiyou Sports St Louis Rams Nfl Serving Tray... Faster Bargain Bic America Subwoofer

Wednesday, July 11, 2012

Plain 18-8 Stainless Steel Machine Screw, Pan Head, #3 Philips Drive, 1/4" - 20, 1-1/2" Length, 2A Thread Class, Fully Threaded (Pack of 25)

!9#Plain 18-8 Stainless Steel Machine Screw, Pan Head, #3 Philips Drive, 1/4" - 20, 1-1/2" Length, 2A Thread Class, Fully Threaded (Pack of 25)

Brand : Small Parts
Rate :

Post Date : Jul 11, 2012 18:36:07
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Adidas Ast Ts Lightspeed P Mens' Basketball Shoe Style# 077505-blk/rwht... Remove

Friday, July 6, 2012

Stainless Steel Machine Screw, Flat Head, Phillips Drive, #8-32, 3/16" Length (Pack of 100)

!9# Stainless Steel Machine Screw, Flat Head, Phillips Drive, #8-32, 3/16" Length (Pack of 100)

Brand : Small Parts | Rate :

| Post Date : Jul 06, 2012 08:36:04 | Usually ships in 24 hours

Stainless Steel Machine Screw, Flat Head, Phillips Drive, #8-32, 3/16" Length (Pack of 100)

Machine Screws are often used with nuts or driven into tapped holes
Stainless Steel is suitable where formability and cost are important considerations
Flat head style allows fastener to sit flush to the surface
Phillips drive is designed to cam out under too much torque
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads