Brass Machine Screw, Pan Head, Phillips Drive, #5-40, 5/8" Length (Pack of 100)

!9#Brass Machine Screw, Pan Head, Phillips Drive, #5-40, 5/8" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 31, 2012 17:57:07
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Jbl Center Channel Speakers Compare Prices Wholesale Bookshelf Speakers Lowest Price Manfrotto 196b-3 143bkt 3-section Single Articulated Arm With Camera...

Floor Pad, SoftCarpets, Royal Blue, 20' x 50' Set, Total Sq. Ft.:1000

!9# Floor Pad, SoftCarpets, Royal Blue, 20' x 50' Set, Total Sq. Ft.:1000

Rate : | Price : | Post Date : Mar 28, 2012 11:00:15
Usually ships in 4-5 business days

Floor Pad, Softcarpets, Royal Blue, 20' x 50' Set, Total Sq. Ft.:1000A perfect combination of durability and comfort for Residential or Commercial or Industrial applications. PP commercial carpet bonded to our closed cell EVA Foam Rubber makes SoftCarpetsLighweight, Portable, Waterproof, Soundproof, Aerobic, Shock Absorbent, Insulating, etc. Components: Corner: 4, Border: 62, Inside: 184 Packaging information: Total Pieces: 250, Total Cartons: 10, Full Cartons (25 pcs): 10, Full Carton Weight (lbs.): 42, Partial Carton (Total Pieces): 0, Partial Carton (Product photo may not exactly match the product offered for sale. Please refer to the product description.

Kichler Olympia 5-Light Mini Chandelier Olde Bronze 1678OZ

!9# Kichler Olympia 5-Light Mini Chandelier Olde Bronze 1678OZ

Brand : Olympia | Rate : | Price :
Post Date : Mar 27, 2012 23:28:41 | N/A

The Olympia 5-Light Mini Chandelier by Kichler. Olde Bronze Finish. 12 Height x 16.5 Width. Medium bulbs (not included). Weight 12.15 lbs. This item features . hybrid socket(s), compatible with Compact Fluorescent bulbs. SAVE EVEN MORE. by buying . Compact Fluorescent Bulbs from LampsUSA. This product features hybrid medium-base/E-27/Compact Fluorescent (CFL) compatible socket(s), supporting both regular incandescent and CFL energy-saving light bulbs. CFL bulbs save money over their long lifetime compared to incandescent bulbs!. Compatible sockets in this product can accept up to 60-Watt Compact Fluorescent bulbs. These may include 13-15 Watts (equivalent to 60 Watts Incandescent), 9-14 Watts (equivalent to 40 Watts Incandescent), 18-25 Watt (equivalent to 75 Watts Incandescent), 23-30 Watt (equivalent to 100 Watts Incandescent) or 30-52 Watt (equivalent up to 150 Watts incandescent). Suitable for medium-base E-27 sockets only. Click for more Compact Fluorescent information.

• Finish: Olde Bronze (Bronze / Brown)
• Designed with a Soft Contemp/Casual Lifestyle style (Casual)
• Features 5 Lights with Cream Shades
• Part of the Olympia Family by Kichler, size is 12" Height x 16.5" Width x 16.5" Depth

!9# Boiron Homeopathic Medicine Ignatia Amara, 30C Pellets, 80-Count Tubes (Pack of 5)

Brand : Boiron | Rate : | Price : $37.14
Post Date : Mar 27, 2012 11:36:11 | Usually ships in 6-10 business days

Boiron Homeopathic Medicine Ignatia Amara, 30C Pellets, 80-Count Tubes (Pack of 5)

• A homeopathic medicine that works naturally
• No side effects, no drug interactions, no contraindications, and no "masking" of symptoms
• Regulated as a OTC (Over the Counter) drug by the FDA

More Specification..!!

Boiron Homeopathic Medicine Ignatia Amara, 30C Pellets, 80-Count Tubes (Pack of 5)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 3/4" Length (Pack of 100)

!9#Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 3/4" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 27, 2012 10:32:06
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Get Cheap Decal-tbo Ryobi - Ridgid 990211001...

StarTech Replacement Screws - 15 Pack 15SCREW6_32

!9# StarTech Replacement Screws - 15 Pack 15SCREW6_32

Rate : | Price : $1.99 | Post Date : Mar 23, 2012 03:04:23
Usually ships in 24 hours

This pack of 15 #6-32 x 1/4" long screws are handy for building, repairing, and maintaining computer systems.

• Link Depot Accessory Computer Screws Kit 68Pcs
• StarTech PC Mounting Computer Screws M3 x 1/4-Inches Long Standoff - 50 Pack SCREWM3
• StarTech 6-32 Brass Motherboard Standoffs for ATX Computer Case - 15 Pack STANDOFF632
• StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15
• StarTech M3 x 1/4-Inches Long Screws - 15 Pack 15SCREWM3

Vtech Bugsby Save Best Reviews Of Cmm1200 Black Decker For Sale Jessica Simpson Waleo Pump

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)

!9# Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)

Rate : | Price : | Post Date : Mar 18, 2012 19:45:20
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #10-32, 7/8" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, #4-40, 1/4" Length (Pack of 25)
• Stainless Steel Hex Nut, #8-32 (Pack of 100)

Price Comparisons Lysol Coupons Printable Saving Dell Motherboards Best Buy M-audio 88sx

FastenMaster FMGUT007-10BR 7 Inch Gutter Screws, Brown, 10-Pack

!9#FastenMaster FMGUT007-10BR 7 Inch Gutter Screws, Brown, 10-Pack

Brand : FastenMaster
Rate :
Price : $17.85
Post Date : Mar 15, 2012 06:20:04
Usually ships in 24 hours

Replaces old gutter spikes. Has a diameter that is larger than gutter spikes therefore it grabs right into the old spike hole offering unmatched holding power and a watertight fit. Corrosion resistant. Square drive. Blister pack includes complete set: Ten 7'' screws, ten 5'' ferrules, and 1 driver bit.

Imax Navy Pier Best Quality Saving Fulcrum Wheelset

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)

!9#Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 12, 2012 11:20:13
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Order Fisher Geotrax Train Set New Lc4 Chaise Octo Spray 2 Chrome Rain Shower Head With Riser Arm... Better Than

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 35mm Length (Pack of 100)

!9# Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 35mm Length (Pack of 100)

Rate : | Price : | Post Date : Mar 09, 2012 03:15:16
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 16mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #4-40, 5/8" Length (Pack of 100)
• Metric Black Oxide 12.9 Alloy Steel Socket Head Cap Screw, Hex Socket Drive, M3-0.50, 16 mm Length (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)

Frank Miller's Sin City [umd For Psp]... Discounted Order Reusable Keurig K Cups Best Prices Presto Pizza Maker

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #0-80, 1/4" Length (Pack of 100)

!9# Stainless Steel Machine Screw, Pan Head, Phillips Drive, #0-80, 1/4" Length (Pack of 100)

Brand : Small Parts | Rate : | Price :
Post Date : Mar 05, 2012 21:57:04 | Usually ships in 24 hours

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #0-80, 1/4" Length (Pack of 100)

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

More Specification..!!

Slap Your Mama Seasoning Save You Money Asus G73 Buy Online Liftmaster Formula 1 Purchase

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

!9# Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

Brand : Small Parts | Rate : | Price :
Post Date : Mar 03, 2012 02:19:20 | Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Coupons Playtex Tampons Best Bosch Grain Mill Sale Used Blue Lagoon Burlesque Corset And Pettiskirt...